detailsImageMain
680ES Gas-Power Cutter
Deep Cutting, Gas Power Cutter
NOW 50:1 (2%) Fuel-to-oil!

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 12-inch (30 cm) and 14-inch (35 cm) guidebars and the entire line of FORCE3 series diamond chain.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

680ES Powerhead only MSRP $1425
680ES Saw packages start at MSRP $2080
Click below to purchase or to see other packages.

FEATURES AND BENEFITS

  • Polyester air filter designed specifically for wet cutting
  • Operates FORCE3™ diamond chain consumables up to 14” (35cm)
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 4” x 4” (10 cm x 10 cm)
  • Easy-to-start in all weather

TECHNICAL SPECIFICATIONS

Engine Type 2-stroke, Air Cooled
Displacement 76.5 cc (4.7 cu-in)
Horsepower 3.7 kW (5 hp) @ 9,500 rpm
Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power 34.5 m/s (6800 ft /min)
Weight 9.5 kg (21 lbs) powerhead only
Dimensions 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
Starter Dust and water resistant
Ignition Special water resistant electronic ignition
Fuel ratio 2% (50:1) gasoline-to-oil
Fuel Capacity 0.88 liter (0.23 gallon)
Water Supply Requirement Minimum: 1.5 bar (20 psi)
Water Flow Requirement Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1) 117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa 101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2) 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle

1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011

PRODUCT DOWNLOADS

Want to stay on top of all things ICS, Merit and Pentruder?

Sign up for our enewsletter!

Sign up here