detailsImageMain
695XL-PG Gas Power Cutter for Pipe cutting
Deepest, Most Versatile Gas Power Cutter
The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 12-inch (30 cm) - 16-inch (40cm) guidebars and the entire line of MAX, ProForce and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors and concrete professionals.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

695XL Powerhead only MSRP $2265
695XL PG Saw packages start at MSRP $3070
Click below to purchase or to see other packages.

FEATURES AND BENEFITS

  • Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more
  • Most versatile gas power cutter
  • New piston and cylinder lowers engine temperature
  • Better operator control
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • New easy-to-tune carburetor

TECHNICAL SPECIFICATIONS

Engine Type 2-Stroke, Air Cooled
Displacement 94cc (5.7 cu-in)
Horsepower 4.8kW (6.4 hp) @ 9000 rpm
Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm
Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
Chain Speed at Maximum Power 28 m/s (5500 ft /min)
Weight 9.5 kg (21 lbs) powerhead only
Dimensions 46cm (18") L x 36cm (14") H x 30cm (12") W
Starter Recoil, dust and water resistant
Ignition Special water resistant electronic ignition
Fuel ratio 2% (50:1) gasoline-to-oil
Fuel Capacity 1 liter (0.26 gallon)
Water Supply Requirement Minimum: 1.5 bar (20 psi)
Water Flow Requirement Minimum: 1.5 bar (20 psi)
Guaranteed Sound Power Level, Lwa (1) 115 dB(A); (Kwa=1.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa 104.6 dB(A) (K=1.0 dB(A))
Vibration, ahv eq Concrete Cutting (2) 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle
Vibration, ahv eq Pipe Cutting (2) 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle

(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010/(2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432:2012

PRODUCT DOWNLOADS