Looking to buy or rent?
Find the nearest full-service ICS dealer or authorized equipment rental location.

Videos

Comparison videos

See the ICS power cutters go head-to-head with other industry tools. Both cut openings, both get the job done. See the benefits of using the ICS tools to get your job done faster, easier and with less clean up than some of our competitors.

ICS 680ES vs cut-n-break – Window opening

The ICS 680ES gas power cutter goes head to head against the cut-n-break. Both cut an opening in a brick wall that is 2′ x 2′ x 8″ thick. See the benefits of using the ICS tool to make this cut.

ICS 695XL vs Core Drill – Corner cut

The ICS 695XL gas power cutter goes head to head against a core drill to cut a corner opening. Both cut a 12″ x 12″ corner in 8 concrete. See the benefits of using the ICS tool to make this cut.

ICS 695XL vs Ring Saw – Window opening

The ICS 695XL gas power cutter goes head to head against the ring saw. Both cut an opening in a concrete wall that is 18″ x 18″ x 8″ thick. See the benefits of using the ICS tool to make this cut.

ICS 695XL vs Cut-n-Break – Floor cut

The ICS 695XL gas power cutter goes head to head against the cut-n-break – making a cut in a concrete floor. Both cut a horizontal opening in a concrete floor that is 14″ x 9″ and 12″ thick. See the benefits of using the ICS tool to make this cut.

ICS 695XL vs Cut-n-Break – Window opening

The ICS 695XL gas power cutter goes head to head against the cut-n-break. Both cut an opening in a concrete wall that is 12″x 12″ x 12″ thick. See the benefits of using the ICS tool to make this cut.

Step-by-step guides

Being a professional is about getting it done right—the first time. That’s why our experts created easy-to-follow instructions for some of our most popular product applications.

Small openings

Create a small opening in as little as five minutes.

tips1

Egress windows

Carve out perfect openings for additions and basement remodels.

tips3

Concrete pipe tap

Cut clean, tight-fitting joints for concrete pipe taps, with no overcutting or cracking.

tips2

vertrule
Instructional videos

You want to get the most out of your ICS® equipment. We can help. Check out the videos below for everything from basic maintenance and troubleshooting to operating and safety tips.

Maintenance of your ICS 695 or 890 Saw Introduction

Introduction to our video series highlighting maintenance tips to get the most out of your ICS 695 or 890 saw.

695 Maintenance Introduction

Maintaining your 695 gas powered saw

695 Daily Inspection

How to inspect the 695 daily to get the best life out of your saw

695 Set Up

Setting up your 695 for the first time

695 Fuel Ratio

Making sure your fuel-to-oil ratio is correct

695 Starting Procedures

We walk you through the best practices for starting your 695

695 Drive Sprocket

Aaron and Brady show you step-by-step how to replace your drive sprocket

695 Air Filter and Spark Plug

Replacing these two inexpensive items regularly can extend the life of your saw. Click below for instructions

695 Starter Cover and Rope

A broken starter rope can be frustrating, replacing it doesn’t have to be

695 Fuel Filter

An easy part to overlook, but simple to replace. Here’s how.

890 Maintenance Introduction

Maintaining your 890 hydraulic powered saw

890 Daily Inspection

How to inspect the 890 daily to get the best life out of your saw

890 Set Up

Setting up your 890 for the first time

890 Operating Procedures

How to prepare to cut using the 890 hydraulic saw

890 Drive Sprocket

Aaron and Brady show you step-by-step how to replace your drive sprocket

Cutting Techniques

Brady highlights the best practices to use when cutting with PowerGrit Utility Saw Chain

695 and 890 Post Use Recommendations

You’re done for the day, we show you how put your tools away clean and ready for tomorrow

Maintenance Wrap Up

Any questions on what you’ve seen? Call customer service at 800.321.1240, we are here to help.

Tensioning

Maximize your chain life with these helpful tips.

Safety

Ensure your team is following current industry safety standards.


Crawl space cut

This video demonstrates the unique abilities of the ICS 814 to make deep cuts into reinforced concrete in extremely tight spaces.

Assembly, fueling, and starting

A basic overview covering the how-to’s of assembling your ICS chain saw, proper fueling, and tips on easy starting.

Cutting techniques

A great video to watch whether you are a seasoned pro or an ICS beginner.